If you require an over height interior door without delay, Superior Doors stocks two door options (2200mmUni & 2400mmUni) that can be cut down to custom sizes by the prehanger, builder, or handyman.
These doors are manufactured with an oversize pine rail at the top and bottom, giving you the opportunity to cut down to any size between 2200mm & 1980mm (2200Uni) and 2400mm & 2200mm (2400Uni).
It is important to note that when cutting these doors down, an equal amount should be cut from both ends for the sake of centralising the doors lock block.
RibCore Specifications - 2200mm Uni
RibCore
Up to 42% Glue Contact area
Will not delaminate after impact
Enhanced thermal qualities
LockBlock
640x68mm Finger Jointed Pine
Rails & Stiles
Rails : 132mm Finger Jointed Pine for 2200 Height Uni doors
Stiles : 40mm Finger Jointed Pine
RibCore Specifications - 2400 Uni
RibCore
Up to 42% Glue Contact area
Will not delaminate after impact
Enhanced thermal qualities
LockBlock
640x68mm Finger Jointed Pine
Rails & Stiles
Rails : 132mm Finger Jointed Pine for 2400 Height Uni doors
Stiles : 40mm Finger Jointed Pine
PLEASE NOTE: Stock Uni (Universal) Doors are manufactured with 4mm skins (38mm thick door) only and are available in standard widths 410mm to 910mm, in heights of 2200mm and 2400mm.
All other skin thicknesses or custom width doors are made to order and are not manufactured to be cut down. If you require a Uni door with any other skin thickness, you must specify this when placing your order.
Our 3mm 2200mm stock doors are not Uni doors and, therefore, are not designed to be cut down.
